All Lift Cranes CW-Series Cantilevered Wall Mounted Jib Crane 2 to 3 Ton Capacity

Product Description

CW SERIES

All Lift Cranes® Cantilevered 2-3 Ton Wall Mounted Jib Cranes provide hoist coverage and 200 degrees of rotation. This jib has the advantage of providing maximum lift for the hoist, since it can be installed very close to the underside of the lowest ceiling obstruction. It is composed of a vertical mast mounted to 2 brackets on a wall or vertical building beam with a boom that cantilevers out, perpendicular from the wall at the top.

Application
For individual use in bays, along walls, or columns of plants, or as a supplement to an overhead crane or monorail system; this Cantilevered 2-3 Ton Wall Mounted Jib Crane would be the perfect application.

Span Range

• Min. 8’ Span
• Max. 20’ Span

Additional Options

• Tagline Kits
• Rotation Bumpers
• Hoists and Trolleys

Installation Requirements

• Must have a structurally sound wall, column, or base for supporting the Jib Crane.
• Allow for 3” clearance above and along entire length of boom.
• Use grade 5 or better Mounting Bolts – Not included.

CAPACITY LBS	MODEL #	SPAN	BRACKET CENTERS	BEAM HEIGHT	FLANGE WIDTH	THRUST & PULL	UNIT WEIGHT
4,000	CW408	8′	4′-0″	12″	6 ½”	9,950 #	488 #
4,000	CW410	10′	4′-0″	12″	6 ½”	12,445 #	548 #
4,000	CW412	12′	4′-0″	12″	6 ½”	14,975 #	608 #
4,000	CW414	14′	5′-0″	16″	7″	14,350 #	904 #
4,000	CW416	16′	6′-0″	21″	6 ½”	14,075 #	1,332 #
4,000	CW418	18′	6′-0″	21″	6 ½”	15,990 #	1,497 #
4,000	CW420	20′	7′-6″	24″	7″	14,650 #	1,876 #

CAPACITY LBS	MODEL #	SPAN	BRACKET CENTERS	BEAM HEIGHT	FLANGE WIDTH	THRUST & PULL	UNIT WEIGHT
6,000	CW608	8′	4′-0″	16″	7″	14,855 #	691 #
6,000	CW610	10′	4′-0″	16″	7″	18,600 #	775 #
6,000	CW612	12′	6′-0″	16″	7″	14,950 #	1,048 #
6,000	CW614	14′	6′-0″	16″	7″	17,665 #	1,128 #
6,000	CW616	16′	6′-6″	21″	6 ½”	18,975 #	1,509 #
6,000	CW618	18′	7′-6″	24″	7″	18,750 #	1,763 #
6,000	CW620	20′	9′-6″	24″	7″	16,655 #	2,132 #

 

NOTES:

• All weights are estimated & dimensions are subject to change

DEFINITION OF TERMS:

• Span (from center of hinge pin to the end of the beam)
• Thrust & Pull – The forces exerted by a crane on its supporting structure. Thrust is the pushing force, while pull is the tensile force. Maximum thrust & pull occurs when the crane is loaded to capacity